Manual Spray Gun
Spray gun realizes automatic remote to convey and spray liquid coating with the he negative pressure is produced by the sudden expansion of the compressed air in the spray nozzle: it is classified into two types: two-position self-suction adjustable double-pipe spray gun, and two-position self-suction adiustable composite-pipe spray gun.
The atomization quantity and area of the double-pipe spray gun are adjustable, while both the gas discharge an atomization quantities of composite-pipe spray gun are adjustable. The gas discharge position is used for the uniform drving of the coating by blowing and forthe removal of the mold residues, while ihe liquid discharge posiftion is used for the spraying of the liquid coating.
Usage method:
1. Air connector (A or AIR mark) is connected to the air source connecting pipe, and the liquid inlet connector (O or OI mark) is connected to the liquid delivery pipe, and is firmly fixed with iron wire or throat hoop;
2. The liquid delivery pipe is connected with the coating with pressure. Pay attention that the coating pressure should be less than the compressed air pressure;
3. Operating procedures: open the first gear (air supply valve core) to only produce compressed air, and open the first and second gear (liquid valve core) to spray paint;
4. The gas volume and solar term can be regulated by regulating the gas regulating valve core and the liquid regulating valve core.
Model: WFT (Total spray gun length)
Technical parameters: compressed air pressure: 0.4 ~ 0.8MPa;
Commonly used spray gun length: 400mm, 450mm, 500mm; the total length of spray gun can be customized to multiply by 50mm.
Precautions:
1. It is better to clean the spray gun in time after use, especially spray the paint with adhesion or solid particles. Cleaning method: insert the coating pipe into the water (or organic solvent) for 2~3 minutes to achieve the cleaning effect.
2. If the spray gun is found to be blocked, the spray nozzle can be blocked with the thumb, and the first and second gears can be opened at the same time. The blockage may return from the coating pipeline to remove the blockage.
Features:
The gas output and atomization of Single pipe copper head double spray gun can be adjusted. The gas output gear is used for coating blowing, drying and cleaning mold residues, and the liquid output gear is used for spraying liquid coating.
Automatic Spray Gun
Spray gun is mainly used to spray release agent, which can be used in the production process of high-pressure die casting, gravity casting and low-pressure casting. It is a manually operated spray gun, which can be used flexibly according to production requirements and production environment.
The design of the spray gun is diversified, which can be sprayed directly or obliquely. It has different angle design, can mix different materials and spray together, and the speed and pressure can be adjusted. We have more than 10 styles of spray guns to choose from to meet more production needs.
